Journal Articles

1. Y. F. Chang, C.Y. Wu, Min-Hsing Chang, 2023, Fabrication of platinum-cobalt nanowires by centrifugal electrospinning as oxygen reduction catalyst for PEMFC, International Journal of Hydrogen Energy, in press (SCIE).

2. A. C. Ruo, Y. M. Yan, Min-Hsing Chang, T. F. Yang, 2023, Thermal instability of a horizontal nanofluid layer in a porous medium with high porpsity, Journal of Mechanics, Vol. 38, 643-658 (SCIE).

3. B. H. Chen, Min-Hsing Chang, C. Y. Liao, 2022, Fabrication of bimetallic PtPd nanowire electrocatalysts by centrifugal electrospinning method for proton exchange membrane fuel cell, International Journal of Hydrogen Energy, Vol. 47, 37531-37541 (SCIE).

4. W. H. Chen, Y. W. Li, C. C. Lin, Min-Hsing Chang, A. Saravanakumar, L. H.Saw, 2022, Multi-objective optimization design for pressure uniformity in a proton exchange membrane fuel cell stack, International Journal of Energy Research, Vol. 46, 18947-18963 (SCIE).

5. W. H. Chen, Z. H. Tsai, Min-Hsing Chang, T. H. Hsu, P. C. Kuo, 2022, Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells, International Journal of Energy Research, Vol. 46, 163-177(SCIE).

6. Min-Hsing Chang, A. C. Ruo, 2022, Rayleigh-Benard instability in nanofluids: effect of gravity settling, Journal of Fluid Mechanics, Vol. 950, A37(SCIE).

7. W. H. Chen, J. S. Wang, Min-Hsing Chang, A. T. Hoang, S. S> Lam, E. E. Kwon, V. Ashokkumar, 2022, Optimination of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applications, Energy Conversion and Management, Vol. 254, 115209 (SCIE).

8. W. H. Chen, Y. W. Li, Min-Hsing Chang, C. C. Chueh, V, Ashokkumar, L.H. Saw, 2022, Operation and multi-objective design optimization of a plate heat exchanger with zigzag flow channel geometry, Energies, Vol.15, 8205 (SCI).

9. C. Y. Huang, Min-Hsing Chang, 2021, Fabrication of platinum nanowires by centrifugal electrospinning method for proton for exchange membrane fuel cell, International Journal of Hydrogen Energy, Vol. 46, 16717-16733 (SCI).

10. W. H. Chen, Z. L. Tsai, Min-Hsing Chang, S. You, P. C. Kuo, 2021, Geometry optimization and pressure analysis of a proton exchange membrane fuel cell stack, International Journal of Hydrogen Energy, Vol. 46, 16717-16733 (SCI).

11. W. H. Chen, J. S. Wang, Min-Hsing Chang,J. K. Mutuku, A. T. Hoang, 2021, Efficiency improvement of a vertical-axis wind turbine using a deflector optimized by Taguchi approach with modified additive method, Energy Conversion and Management, Vol. 245, 114609 (SCI).

12. A. C. Ruo, W. M. Yan, Min-Hsing Chang, (2021), The onset of natural convection in a horizontal nanofluid layer heated from below, Heal Transfer, Vol. 50, 7764-7783 (SCI).

13. T. Y. Chang, F. Chen, Min-Hsing Chang, (2018), Three-dimensional stability analysis for a salt-finger convecting layer, Journal of Fluid Mechanics, Vol. 841, 636-653 (SCI).

14. T. Y. Chang, F. Chen, Min-Hsing Chang, (2017), Stability of plane Poiseuille-Couette flow in a fluid layer overlying a porous layer, Journal of Fluid Mechanics, Vol. 826, 376-395 (SCI).

15. Y. G. Su, F. Chen, C. Y. Wu, Min-Hsing Chang, (2017), Simulation for the effect of wetting conditions of melt puddle on the Fe Si—B ribbon alloy in the planar-flow melt-spinning process. ISIJ International, Vol. 57, 100-106 (SCI).

16. C. C. Fan, Min-Hsing Chang, (2016), Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer. International Journal of Energy Research, Vol.40, 181-188 (SCI).

17. J. R. Jiang, F. Chen, C. Y. Wu, Min-Hsing Chang, (2016), Application of infinitesimal fluid element approach to analyze contact angle with surfactant effect. Journal of Multidisciplinary Engineering Science and Technology, Vol. 3, 5466-5470.

18. Y. G. Su, F. Chen, C. Y. Wu, Min-Hsing Chang, (2015), Effect of surface roughness of chill wheel on ribbon formation in the planar flow casting process. Journal of Materials Processing Technology, Vol. 229, 609-613 (SCI).

19. Y. G. Su, F. Chen, C. Y. Wu, Min-Hsing Chang, C. A. Chung, 2015, Effects of manufacturing parameters in planar flow casting process on ribbon formation and puddle evolution of Fe-Si-B alloy. ISIJ International, Vol. 55, 2383-2390 (SCI).

20. S. Y. Lin, Min-Hsing Chang, (2014), Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance. International Journal of Hydrogen Query, Vol. 40, 7879-7885 (SCI).

21. G. M. Huang, Min-Hsing Chang, (2014), Effect of gas diffusion layer with double –side microporous layer coating on proton exchange membrane fuel cell performance under different air inlet relative humidity. International Journal of Electrochemical Science, Vol. 9, 7819-7831 (SCI).

22. M. T. Sung, Min-Hsing Chang, M. H. Ho, (2014), Investigation of cathode electrocatalysts composed of electrospun Pt nanowires and Pt/C for proton exchange membrane fuel cells. Journal of Power Sources, Vol. 249, 320-326 (SCI).

23. Y. G. Su, F. Chen, C. M. Chang, C. Y Wu, Min-Hsing Chang, C. A. Chung, (2014), Tuning the Planar-Flow Melt-Spinning Process Subject to Operability Conditions, JOM, Vol. 66, 1277-1286 (SCI).

24. H. M. Chang, Min-Hsing Chang, (2013), Effect of gas diffusion layer with double-side microporous layer coating on polymer electrolyte membrane fuel cell performance. ASME Journal of Fuel Cell Science and Technology, Vol. 10, 021005 (SCI).

25. H. H. Chen, Min-Hsing Chang, (2013), Effect of cathode microporous layer composition on proton exchange membrane fuel cell performance under different air inlet relative humidity. Journal of Power Sources, Vol. 232, 306-309 (SCI).

26. Chun-Ting Liu, Min-Hsing Chang, (2013), Effects of microporous layer on PBI-based proton exchange membrane fuel cell performance. International Journal of Electrochemical Science, Vol. 8, 3687-3695 (SCI),

27. C. C. Chiang, Min-Hsing Chang, (2012), Characterization of a membraneless microfluidic hydrogen/air fuel cell. Journal of the Chinese Society of Mechanical Engineers, Vol. 33, 427-433 (SCI).

28. A. C. Ruo, K. H. Chen, Min-Hsing Chang, F. Chen, (2012), Instability of a charged non-Newtonian liquid jet. Physical Review E, Vol. 85, 016306 (SCI).

29. H. M. Chang, Min-Hsing Chang, (2012), Effects of assembly pressure on the gas diffusion layer and performance of a PEM fuel cell. Applied Mechanics and Materials, Vol. 110, 48-52 (SCI).

30. A. C. Ruo, F. Chen, C. A. Chung, Min-Hsing Chang, (2011), Three-dimensional response of unrelaxed tension to instability of viscoelastic jets. Journal of Fluid Mechanics, Vol. 682, 558-576 (SCI).

31. H. M. Chang, C. W Lin, Min-Hsing Chang, H. R. Shiu, W. C. Chang, F. H. Tsau, (2011), Optimization of polytetrafluoroethylene content in cathode gas diffusion layer by the evaluation of compression effect on the performance of a proton exchange membrane fuel cell. Journal of Power Sources, Vol. 196, 3773-3780 (SCI).

32. Min-Hsing Chang, A. C. Ruo, F. Chen, and S. T. Chang, (2011), The effect of Joule-heating-induced buoyancy on the electrohydrodynamic instability in a fluid layer with electrical conductivity gradient, Int. J. Heat and Mass Transfer, Vol. 54, 3837-3845 (SCI).

33. A. C. Ruo, Min-Hsing Chang, F. Chen, 2010, Electroshydrodynamic instability of a charged liquid jet in the presence of an axial magnetic field. Physics of Fluids, Vol. 22, 044102 (SCI).

34. A. C. Ruo, Min-Hsing Chang, F. Chen, (2010), Effect of rotation on the electrohydrodynamic instability of a fluid layer with an electrical conductivity gradient, Physics of Fluids, Vol. 22, 024102 (SCI).

35. C. Y Hsueh, H. S. Chu, W. M. Yan, C. H. Chen, Min-Hsing Chang, (2010), Numerical study of heat and mass transfer in the plate methanol steam micro-reformer channels. Applied Thermal Engineering, Vol. 30, 1426-1437 (SCI).

36. F. Chen, Min-Hsing Chang, C. Y Kuo, C. Y Hsueh, W M. Yan, (2009), Analysis of a Plate-Type Microreformer for Methanol Steam Reforming Reaction. Energy & Fuels, Vol. 23, 5092-5098 (SCI).

37. Min-Hsing Chang, A. C. Ruo, F. Chen, (2009), Electrohydrodynamic instability in a thin fluid layer subject to a weak shear flow with an electrical conductivity gradient, J.  Fluid Mechanics, 634, 191-215 (SCI).

38. H. C. Weng, C. K. Chen, Min-Hsing Chang, (2009), Stability of micropolar fluid flow between concentric rotating cylinders, J. Fluid Mechanics, Vol. 631, 343—362 (SCI).

39. L. M. Chu, Min-Hsing Chang, J. L. Chen, J. Y. Lai, (2009), Simulation and experimental measurement of flow field within an air cleaner of all-terrain vehicle, J. the Chinese Society of Mechanical Engineers, Vol. 30, 143-150 (SCI).

40. A. C. Ruo, F. Chen, Min-Hsing Chang, (2009), Linear instability of compound jets with noNaxisymmetric disturbances. Physics of Fluids, Vol. 21, 012101 (SCI).

41. F. Chen, Min-Hsing Chang, P. T. Hsieh, (2008), Two-phase transport in the cathode gas diffusion layer of PEM fuel cell with a gradient in porosity, International Journal of Hydrogen Energy, Vol. 33, 2525-2529 (SCI).

42. A. C. Ruo, Min-Hsing Chang, F. Chen, 2008, On the nonaxisymmetric instability of round liquid jets, Physics of Fluids, Vol. 20, 062105 (SCI).

43. L. M. Chu, Min-Hsing Chang, H. C. Hsu, W. T. Chien, C. FI. Liu, (2008), Simulation and Experimental Measurement of Flow Field within Four-Stroke motorcycle engines, J. the Chinese Society of Mechanical Engineers, Vol. 29, 149-158 (SCI).

44. F. Chen, Min-Hsing Chang, H. Y. Lin, (2008), Analysis of a novel MEMS-based design of micro-direct methanol fuel cell, Journal of Power Sources, Vol. 178, 125-131 (SCI).

45. F. Chen, Min-Hsing Chang, C. W. Hsu, (2007), Analysis of membraneless microfuel cell using decomposition of hydrogen peroxide in a Y-shaped microchannel, Electrochemical Acta, Vol. 52, 7270-7277 (SCI).

46. F. Chen, Min-Hsing Chang, M. K. Lin, (2007), Analysis of membraneless formic acid microfuel cell using a planar microchannel, Electrochemical Acta, Vol. 52, 2506-2514 (SCI).

47. F. Chen, Min-Hsing Chang, C. F. Fang, 2007, Analysis of water transport in a five-layer model of PEMFC, Journal of Power Sources, Vol. 164, 649-658 (SCI).

48. H. M. Chu, Min-Hsing Chang, J. H. Yang, J. Y. Lai, (2007), A novel design of air cleaner for motorcycles, J. Chinese Society of Mechanical Engineers, Vol. 28, 429-435.

49. Min-Hsing Chang, F. Chen, H. S. Teng, (2006), Effects of two-phase transport in the cathode gas diffusion layer on the performance of a PEMFC, Journal of Power Sources, Vol. 160, 268-276 (SCI).

50. C. R. Tsai, F. Chen, A. C. Ruo, Min-Hsing Chang, H. S. Chu, C. Y. Soong, W. M. Yan, C. H. Cheng, (2006), An analytical solution for transport of oxygen in cathode gas diffusion layer of PEMFC, Journal of Power Sources, Vol. 160, 50-56 (SCI).

51. Min-Hsing Chang, F. Chen, N. S. Fang, (2006), Analysis of membaneless fuel cell using laminar flow in a Y-shaped mincofluidic channel, Journal of Power Sources, Vol. 159, 810-816 (SCI).

52. Min-Hsing Chang, F. Chen, B. Straughan, (2006), Stability of plane-Poiseuille flow in a fluid overlying a porous layer, Journal of Fluid Mechanics, Vol. 564, 287-303 (SCI).

53. Min-Hsing Chang, (2006), Thermal convection in superposed fluid and porous layers subjected to a plane Poiseuille flow, Physics of Fluids, Vol. 18, 035104 (SCI).

54. Min-Hsing Chang, G. M. Homsy, (2005), Effects of Joule heating on the stability of time-modulated electroosmotic flow, Physics of Fluids, vo1. 17, 074107 (SCI).

55. Min-Hsing Chang, (2005), Thermal convection in superposed fluid and porous layers subjected to a horizontal plane Couette flow, Physics of Fluids, Vol. 17, 064106 (SCI).

56. Min-Hsing Chang, (2004), Stability of convection induced by selective absorption of radiation in a fluid overlying a porous layer, Physics of Fluids, Vol. 16, 3690-3698 (SCI).

57. Min-Hsing Chang, (2005), A decomposition solution for fins with temperature dependent surface heat flux, International Journal of Heat and Mass Transfer, Vol. 48, 1819-1824 (SCI).

58. Min-Hsing Chang, (2003), Hydrodynamic stability of Taylor-Dean flow between rotating porous cylinders with radial flow, Physics of Fluids, Vol. 15, 1178-1188 (SCI).

59. Min-Hsing Chang, F. Chen, (2003), Stability characteristics of the mush affected by the solid layer below, Journal of Crystal Growth, Vol. 255, 369-378 (SCI).

60. Min-Hsing Chang, C. K. Chen, (2003), Current-induced instabilities of hydromagnetic flow in a small gap between rotating conducting cylinders, Acta Mechanical, Vol. 162, 125-141 (SCI).

61. Min-Hsing Chang, C. K. Chen, H. C. Weng, (2003), Stability of ferrofluid flow between concentric rotating cylinders with an axial magnetic field, International Journal of Engineering Science, Vol. 41, 103-121 (SCI).

62. Min-Hsing Chang, C. K. Chen, (2002), The stability of the narrow-gap Taylor-Couette system with an axial flow, Acta Mechanical, Vol.156, 131-143 (SCI).

63. Min-Hsing Chang, F. Chen, (2001), Flows induced by inclined rotation in directional solidification of variable-viscosity solutions, Journal of Crystal Growth, Vol. 233, 881-896 (SCI).

64. Min-Hsing Chang, J. H. Lin, C. K. Chen, (2001), The inverse estimation of local heat transfer coefficient in a vertical plate fin with its base subjected to periodically oscillated temperature, Numerical heat transfer, Part A, Vol. 40, 253-271 (SCI).

65. Min-Hsing Chang, C. K. Chen, (1999), Hydromagnetic stability of current-induced flow between concentric cylinders, ASME, Journal of Fluids Engineering, Vol. 121, 548-554 (SCI).

66. Min-Hsing Chang, C. K. Chen, (1998), Hydromagnetic stability of current-induced flow in a small gap between concentric rotating cylinders, Proceeding of Royal Society, London, Vol. A454, 1857-1873 (SCI).

67. C. K. Chen, Min-Hsing Chang, (1998), Stability of Hydromagnetie dissipative Couette flow with non-axisymmetric disturbance, Journal of Fluid Mechanics, Vol. 366, 135-158 (SCI).

68. F. Chen, Min-Hsing Chang, (1992), Stability of Taylor-Dean flow in a small gap between rotating cylinders, Journal of Fluid Mechanics, Vol. 243, 443-455 (SCI).

International Conference Papers

1. C. Y. Wu, Min-Hsing Chang. Fabrication of platinum-cobalt nanowires by centrifugal electrospinning method as electrocatalysts for PEMFC. 23t World Hydrogen Energy Conference, Istanbul, Turkey, June 26-30, 2022.

2. F. H. He, Min-Hsing Chang. Fabrication of CuO nanowires by the electro-forcespinning method. The International Conference on Sustainable Energy and Green Technology 2019 (SEGT 2019), Bangkok, Thailand, December 11-14, 2019.

3. Min-Hsing Chang. A revised model for the effect of thermophoresis on the onset of convection in a horizontal nanofluid layer. 8th International Symposium on Bifurcations and Instabilities in Fluid Dynamics, Limerick, Ireland, July 16-19, 2019.

4. J. Y. Chen, Min-Hsing Chang. Fabrication of palladium nanowires by centrifugal electrospinning method as electrocatalyst for low temperature fuel cells. 25th Topical Meeting of the International Society of Electrochemistry: New electrochemical processes for energy and the environment, Toledo, Spain, May 12-15, 2019.

5. Y. T. Tsai, Min-Hsing Chang. Numerical simulation for the effects of cathode flow channel with trapezoidal cross-section on the performance of a high-temperature PEMFC. The International Conference on Sustainable Energy and Green Technology 2018 (SEGT 2018), Kuala Lumpur, Malaysia, December 11-14, 2018.

6. C. Y. Lee, Min-Hsing Chang. Fabrication of PtPd nanowires by the electrospinning method for the application in polymer electrolyte fuel cells. 3rd Green and Sustainable Chemistry Conference, Berlin, Germany, May 13-16, 2018.

7. Y. H. Huang, Min-Hsing Chang. Fabrication of PEO and Nation nanofibers for PEM fuel cells by the forcespinning technique. 9th International Exergy, Energy and Environment Symposium (IEEES-9), Split, Croatia, May 14-17, 2017.

8. S. W. Huang, Min-Hsing Chang. Fabrication of Anode Microporous Layer with Carbon Nanotubes and its Effect on Proton Exchange Membrane Fuel Cell Performance. 66th Annual Meeting of the International Society of Electrochemistry, Taipei, Taiwan 4-9 October, 2015.

9. C. C. Fan, Min-Hsing Chang. Fabrication of Cathode Microporous Layer with Carbon Nanotubes and its Effect on Proton Exchange Membrane Fuel Cell Performance. The 7th International Conference on Applied Energy —ICAE20I5, Abu Dhabi, United Arab Emirates, March 28-31, 2015.

10. H. C. Yu, Min-Hsing Chang. Preparation of electrospun polyacrylonitrile-based carbon nanofibers as Pt catalyst support and its application in a PEM fuel cell. 65th Annual Meeting of the International Society of Electrochemistry, Lausanne, Switzerland, 31 August - 5 September, 2014.

11. S. Y. Lin, Min-Hsing Chang. Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance. 13th International Conference on Clean Energy, Istanbul, Tuckey, June 8-12, 2014.

12. C. Y. Chuang, Min-Hsing Chang. Optimal synthesizing ratio of Pt/CNT and Nafion content in the cathode catalyst layer of a PEM fuel cell. 2014 Energy Material Nanotechnology (EMN) East Meeting, Beijing, China, May 12-15, 2014.

13. Y. H. Hung, Min-Hsing Chang. Application of carbon nanotubes as Pt support in cathode catalyst layer and performance analysis for a proton exchange membrane fuel cell. 3rd International Colloids Conference: Colloids & Energy, Xiamen, China, April 21-24, 2013.

14. G. M. Huang, Min-Hsing Chang. Effects of gas diffusion layer with double-faced microporous layer coating on the performance of a PEM fuel cell under different air inlet relative humidity. 63th Annual Meeting of the International Society of Electrochemistry, Prague, Czech Republic, August 19-24, 2012.

15. H. M. Chang, Min-Hsing Chang. Effect of gas diffusion layer with double-faced microporous layer coating on the performance of a PEM fuel cell. 4th International Conference on Applied Energy, Suzhou, China, July 5-8, 2012.

16. Hong-Hua Chen, Min-Hsing Chang. Effects of composition in cathode microporous layer on the performance of a proton exchange membrane fuel cell under different air inlet relative humidity. 19th World Hydrogen Energy Conference, Toronto, Canada, June 3-7, 2012.

17. H. M. Chang, Min-Hsing Chang. Effects of Assembly Pressure on the Gas Diffusion Layer and Performance of a PEM Fuel Cell. International Conference on Power and Energy Engineering, Bangkok, Thailand, July 29-31, 2011.

國內研討會論文

1. 王明興、張敏興(2022)。電紡鉑鎳奈米纖維製作與質子交換膜燃料電池觸媒應用分析。中國機械工程學會第39屆全國學術研討會，苗栗縣國立聯合大學。

2. 黃怡安、張敏興(2021)。應用離心靜電紡絲法製作鉑金奈米纖維在低溫燃料電池觸媒電極應用研究。中國機械工程學會第38屆全國學術研討會，台南市。

3. 何冠樺、張敏興(2021)。應用旋轉靜電紡司法製造氧化銅奈米纖維技術研究。第16屆全國氫能與燃料電池學術研討會，桃園市。

4. 謝睿宇、王明興、張敏興(2021)。旋轉靜電紡絲法製造鉑釕奈米纖維技術研究與燃料電池應用性能測試分析。台灣機電工程國際學會第6屆全國學術研討會，桃園市。

5. 吳鎮宇，張敏興(2020)。應用旋轉靜電紡絲法製作鉑鈷合金奈米纖維技術研究與燃料電池應用性能測試分析。中國機械工程學會第37屆全國學術研討會，雲林縣國立虎尾科技大學。

6. 陳柏翰，張敏興(2019)。應用旋轉靜電紡絲法製作鉑鈀奈米纖維技術研究與燃料電池應用性能測試分析。中國機械工程學會第36屆全國學術研討會，台北市。

7. 李政嶽、張敏興(2018) 應用靜電紡絲法製作鉑鈀奈米纖維技術研究與燃料電池應用性能測試分析。中國機械工程學會第35屆全國學術研討會，嘉義縣。

8. 黃至麒，張敏興(2018)。高溫型質子交換膜燃料電池U型流道設計對性能影響計算分析。第13屆全國氫能與燃料電池學術研討會，桃園市。

9. 黃朝揚，張敏興(2017)。旋轉靜電紡絲技術製作白金奈米纖維與質子交換膜燃料電池應用性能測試分析。中國機械工程學會第34屆全國學術研討會，台中市。

10. 黃鈺涵，張敏興(2016)。應用旋轉離心紡絲技術製作聚環氧乙烷與Nafion奈米纖維技術研究。第11屆全國氫能與燃料電池學術研討會，台北市。

11. 許寶璌，張敏興(2015)。應用電紡白金奈米纖維與白金碳載體製作陰極雙層觸媒電極對質子交換膜燃料電池應用性能影響測試分析。中國機械工程學會第32屆全國學術研討會，高雄市。

12. 黃聖惟，張敏興(2015)。應用奈米碳管製作陽極微孔層對質子交換膜燃料電池應用性能影響測試分析。第10屆全國氫能與燃料電池學術研討會，桃園市。

13. 尤皇純，張敏興(2014)。電紡聚丙烯腈製備碳奈米纖維白金觸媒載體性能測試分析。中國機械工程學會第31屆全國學術研討會，台中市。

14. 莊錦堯，張敏興(2014)。應用白金與奈米碳管載體製作質子交換膜燃料電池陰極觸媒層最佳合成比例與Nafion含量測試分析。第9屆全國氫能與燃料電池學術研討會，台南市。

15. 范哲嘉，張敏興(2013)。應用奈米碳管製作微孔層對質子交換膜燃料電池性能影響計算分析。中國機械工程學會第30屆全國學術研討會。

16. 楊富傑，張敏興(2013)。陰極開孔率對自然進氣質子交換膜燃料電池性能影響測試分析。第20屆全國計算流體力學研討會。

17. 宋明棟，張敏興，何明樺(2012)。電紡白金奈米纖維製作陰極觸媒層對質子交換膜燃料電池性能影響測試分析。中國機械工程學會第29屆全國學術研討會。

18. 洪翊軒，張敏興(2012)。應用白金/奈米碳管載體製作陰極觸媒層對質子交換膜燃料電池性能影響測試分析。力學學會第36屆全國力學會議，台南市。

19. 張皓銘，張敏興(2011)。氣體擴散層雙側微孔層塗佈對質子交換膜燃料電池性能影響實驗分析。中國機械工程學會第28屆全國學術研討會，台中市。

20. 梁任淳，羅安成，張敏興(2011)。磁流體噴流在軸向磁場作用下之不穩定性分析。力學學會第35屆全國力學會議，台南市。

21. 張皓銘，張敏興，蔡之緯(2011)。氣體擴散層雙側微孔層塗佈對質子交換膜燃料電池性能影響計算分析。第18屆全國計算流體力學研討會，宜蘭縣。